Progress:
When placing multiple slings in a rigging shackle, the shackle should be placed on the crane with the _____ up.
Two cheeks, a pulley and a yoke make up this piece of hardware.
A U-shaped piece of rigging hardware is called a ______.
This is used to dead end a wire rope and is sometimes also called a becket.
Multiple cross-overs of wire rope on a winch drum or a tangle of slings is also known as _____.
When the strands and/or the core of the wire rope have recoiled away from the centerline of the wire rope from a sudden release of load tension.
A coupler and link which are seated together due to inner link wear
A section of a roundsling in which it appears to be unusually swollen and thick next to an area which is reduced in the cross-section.
A rigging hand signal showing a “thumb up” with closed fingers indicates
The angle from the horizontal should be at least____ when rigging a 2-leg sling bridle in a single wrap choker hitches around an aluminum pipe.